Basic Filter
Basic filter for residual ignition in LEDs
Filter that attenuates the residual ignition that appears in some LED lamps and remains a little lit when they are disconnected from the mains, especially when there are indicator lights on the mechanisms and / or lack of galvanic isolation of said lamps.
Installation scheme
2-wire installation. Connect in parallel with the load / s regardless of polarity. Optionally it can be installed in parallel to the mechanism that has the pilot light.
Download the product data sheet
For more details of characteristics, operation, control, installation diagram, admissible loads, maximum admissible power, etc. You can view and download the product data sheet by clicking on the button below.
Low cost effective solution
In certain installations, it will be enough to install this filter to solve the problem of unwanted ignitions, but this product is not 100% effective in all installations, as is our other filter. A10 double pole insulator.
recommendations
Connect in parallel with the load / s regardless of polarity. Optionally it can be installed in parallel to the mechanism that has the pilot light.
230VAC supply
230VAC supply. It does not have maximum power, as it does not support any load.
Let's talk...
If you still have any questions, write us: